ConStar 1500 Mobile Concrete Plant

Mobile Concrete Batch Plant

With a production capacity of up to 50m3/h, the ConStar 1500 fully mobile concrete batching plant meets all the requirements for small to medium size projects where there is a need for ready-mix or pre-cast concrete produced to high quality standards.

Semi-trailer towing is easily achieved as the integral control cabin hinges upwards within the main structure for transport. The chassis mounted 35m3 cement silo can be supplemented with either vertical or mobile horizontal silos giving additional capacity and/or greater mix design.

Controls on the ConStar 1500 are easy to use, designed to ensure high levels of accuracy, batch repeatability and mix consistency which are vital for the production of high quality, high strength concrete.

Options

  • Fully mobile road towable unit.
  • Installed and operational within 4 hours.
  • Minimal site preparation required.
  • The extensive access & maintenance platforms.
  • Integral control cabin folds up for transport.
  • Factory pre-wired and fully tested.
  • Fully automatic control system.
  • Multi recipe for all concrete specs.

  • Cement Weigh Hopper

    Mounted above the pan mixer, the cement weigh hopper features two 350kg capacity hoppers mounted on three load cells for accurate weighing.

  • Water Weigh Hopper

    The 250kg capacity water hopper suspended on load cells is supplied by a 2 stage water delivery system and mounted above the mixer to ensure higher accuracy.

  • Retractable Screws

    Two external delivery screws feed into the the cement weigh hopper and retract back on rollers for transport.

  • Access And Walkways

    The extensive access & maintenance platforms are provided to mixer level are easily removed for transportation.

  • Feed Hopper

    Has four compartments for different aggregate sizes, each compartment holding 11m3 of material with bolted hopper extensions which are removed for transport. Vibrators are mounted on two of the hoppers to prevent build up of fine material.

  • Aggregate Weigh Conveyor

    Suspended on load cells, the 800mm wide troughed weigh conveyor has a combined volumetric weighing capacity of 1.5m3 from all hoppers.

  • Cement Silo

    The integral, chassis mounted 35m3 capacity cement silo mounted above the transfer conveyor has two discharge troughs each with high and low level indicators. Cement is delivered to the weigh hoppers via two internally fitted screws.

  • Transfer Conveyor

    Aggregates are transferred to the mixer via an 800mm wide chevron belt conveyor.

  • Control Cabin

    The control cabin is pre-wired and fully tested prior to despatch. The Constar PLC based control system gives fast, accurate measurement of mix ingredients, as well as monitoring dynamic aspects of the plant for continuous and safe operation.

  • Pan Mixer

    The high quality pan mixer features hard wearing abrasive resistant liner plates, paddle arms and tips. The arms are spring loaded and adjustable to compensate for wear and the paddle tips can be adjusted to increase or decrease the angle.