MOBILE BATCH ASPHALT PLANTsRoadStar 1500 / 2000 / 3000

Mobility, efficiency, reliability and speed. Producing the highest quality asphalt in a wide range of mixes.

3 chassis configuration portable/mobile wheeled asphalt batch mixing plants with outputs from 120 to 240 TPH.

The RoadStar combines quality and mobility to provide one of the most reliable and easily transported asphalt mixing plants available anywhere in the world.

Designed to satisfy the needs of contractors who demand nothing less than the best quality asphalt which is within specification at all times, the RoadStar is the ideal solution for major road and motorway construction projects. Requiring minimal foundations the RoadStar has been a particular favourite for many international airport surfacing contracts across the world.

The three main units of the plant - cold feed, dryer and mixing sections - are fully mobile and on arrival at site can be brought quickly into operation. Their field proven design offers high reliability with low maintenance.



Hot Stone Elevator

Totally enclosed bucket elevator, pivots down for transport.


Totally enclosed 2 deck vibrating screen to give 4 sizes plus rejects.

Hot Storage Hopper

4 compartment hot stone bins with pneumatically operated radial type outlet doors.

Aggregate Weigh Hopper 

Load cell mounted hopper with semi-rotary pneumatically operated discharge door.

Batch Elevator

Totally enclosed inclined bucket elevator transfers weighed batch aggregates to mixer.

Bitumen & Filler Weigh Hoppers

Load cell mounted hoppers with Filler weigh hopper discharged by pneumatically operated butterfly valve and Bitumen hopper discharged via pneumatically operated valve.

Paddle Mixer

Fully synchronised twin shaft direct geared paddle mixer.
Easily Transportable

Easily Transportable

Designed with total mobility in mind, each chassis can be easily transported from site-to-site and rapidly put back into operation.

Chassis Landing Legs

Chassis Landing Legs

Minimum foundations are required for installation as each unit has landing legs with support bases to ensure adequate stability.

Multi Hopper Mobile Cold Feed

Multi Hopper Mobile Cold Feed

Multi-hopper, road mobile cold feed unit with built in collecting conveyor and dryer feed conveyor. Direct drive geared motor units give high reliability. Accurate variable speed control via AC motor and inverter.

High Efficiency Aggregate Dryer

High Efficiency Aggregate Dryer

Road mobile unit with high efficiency internal lifter design, optional insulated and clad drum. Integrated primary dust cyclones and highly efficient burner all on one chassis.

Low Level Mobile Mixing Section

Low Level Mobile Mixing Section

Low-level, mobile unit with integral vertical hot elevator, which folds down for travelling. Heavy duty screen with fully sealed dust housing. Batch weigh hoppers for aggregate, bitumen and filler; all load-cell mounted. Fully synchronised twin shaft direct geared paddle mixer.


  • Thermal insulation on the aggregate dryer drum
  • Heavy oil, gas or multi-fuel burners
  • Mobile or transportable secondary dust filtration systems
  • Mobile/static bitumen, filler or mixed material storage systems
  • Hydraulic jacking legs to raise the mixing section


Units RoadStar 1500 RoadStar 2000 RoadStar 3000
Capacity tph 120* 160* 240*
Dryer Diameter m 1.8 2.2 2.5
Air Volume m³/h 51,435 72,590 93,360
Screen Size m 1.5 x 4.0 1.8 x 5.0 2.1 x 6.0
Mixer Size kg 1,500 2,000 3,000
*Plant capacity is based on 3% moisture content of feed aggregate with 0.5% residual moisture content of mixed materials, dryer discharge temperature of 160°C, ambient temperature 15°C at altitude 150m above sea level, aggregate bulk density average 1600kg/m³, 5% bitumen content, 45 second weigh/mix cycle at 100% plant utilisation.

Download Brochures

RoadStar Range
RoadStar 1500
RoadStar 2000
RoadStar 3000

This site uses cookies to offer you a better browsing experience. By using our website, you agree to our use of cookies. Read More