Multitrough Conveyor Idlers
Multitrough Range
Multitrough Idlers Incorporating adjustable wing rollers which may be set at increments, from 20° to 60°, enabling the belt to run at either conventional or deep troughing angles.
The rollers can be easily adjusted & the angle can be varied adjacent to the head & tail drums, to ensure smooth transition from trough to flat conditions without undue belt stress.
All dimensions comply to BS 2890.
| Belt Width (mm) |
Dimensions | Transome (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | B (mm) | C (mm) | Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
||
| 300 - 350 | 152 | 127 | 584 | 12LT | AD 12T | D6CRXX | D5SRXX | AE 12T | E6CR25 | E5SR25 |
| 400 | 152 | 178 | 635 | 16LT | AD 16T | D6CRXX | D7SRXX | AE 16T | E6CR25 | E5SR25 |
| 450 | 203 | 178 | 686 | 18LT | AD 18T | D8CRXX | D7SRXX | AE 18T | E8CR25 | E7SR25 |
| 500 | 203 | 203 | 737 | 20LT | AD 20T | D8CRXX | D8SRXX | AE 20T | E8CR25 | E8SR25 |
| 600 | 305 | 203 | 838 | 24LT | AD 24T | D12CRXX | D8SRXX | AE 24T | E12CR25 | E8SR25 |
| 650 | 356 | 203 | 889 | 26LT | AD 26T | D14CRXX | D8SRXX | AE 26T | E12CR25 | E8SR25 |
| 750 | 356 | 254 | 991 | 30LT | AD 30T | D14CRXX | D10SRXX | AE 30T | E14CR25 | E10SR25 |
| 800 | 406 | 254 | 1041 | 32LT | AD 32T | D16CRXX | D10SRXX | AE 32T | E14CR25 | E10SR25 |
| 900 | 508 | 254 | 1143 | 36LT | AD 36T | D20CRXX | D10SRXX | AE 36T | E20CR25 | E10SR25 |
| 1000 | 558 | 279 | 1240 | 40LT | AD 40T | D22CRXX | D11SRXX | AE 40T | E22CR25 | E11SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
| Belt Width (mm) |
Dimensions | Baseplate (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | B (mm) | C (mm) | Baseplate Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
Baseplate Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
||
| 300 - 350 | 152 | 127 | 254 | 12B | AD 12B | D6CRXX | D5SRXX | AE 12B | E6CR25 | E5SR25 |
| 400 | 152 | 178 | 305 | 16B | AD 16B | D6CRXX | D7SRXX | AE 16B | E6CR25 | E7SR25 |
| 450 | 203 | 178 | 305 | 18B | AD 18B | D8CRXX | D7SRXX | AE 18B | E8CR25 | E7SR25 |
| 500 | 203 | 203 | 330 | 20B | AD 20B | D8CRXX | D8SRXX | AE 20B | E8CR25 | E8SR25 |
| 600 | 305 | 203 | 406 | 24B | AD 24B | D12CRXX | D8SRXX | AE 24B | E12CR25 | E8SR25 |
| 650 | 356 | 203 | 483 | 26B | AD 26B | D14CRXX | D8SRXX | AE 26B | E14CR25 | E8SR25 |
| 750 | 356 | 254 | 483 | 30B | AD 30B | D14CRXX | D10SRXX | AE 30B | E14CR25 | E10SR25 |
| 800 | 406 | 254 | 533 | 32B | AD 32B | D16CRXX | D10SRXX | AE 32B | E16CR25 | E10SR25 |
| 900 | 508 | 254 | 635 | 36B | AD 36B | D16CRXX | D10SRXX | AE 36B | E20CR25 | E10SR25 |
| 1000 | 558 | 279 | 685 | 40B | AD 40B | D18CRXX | D11SRXX | AE 40B | E22CR25 | E11SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
| Belt Width (mm) |
Dimensions | Transome (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | |||||
| A (mm) | C (mm) | Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
||
| 1000 - 1500 | 305 | 1295 | 42LT | AD 42T | D12CRXX | D10SRXX | AE 42T | E12CR25 | E10SR25 |
| 1200 | 406 | 1448 | 48LT | AD 48T | D16CRXX | D10SRXX | AE 48T | E16CR25 | E10SR25 |
| 1400 | 457 | 1600 | 54LT | AD 54T | D18CRXX | D10SRXX | AE 54T | E18CR25 | E10SR25 |
| 1500 | 559 | 1753 | 60LT | AD 60T | D22CRXX | D10SRXX | AE 60T | E22CR25 | E10SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
| Belt Width (mm) |
Dimensions | Baseplate (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | C (mm) | E (mm) | Baseplate Sets (Ref No.) |
Centre Rollers (Ref No.) |
Side Roller (Ref No.) |
Baseplate Sets (Ref No.) |
Centre Rollers (Ref No.) |
Side Roller (Ref No.) |
||
| 1000 - 1500 | 305 | 367 | 813 | 42B | AD 42B | D12CRXX | D10SRXX | AE 42B | E12CR25 | E10SR25 |
| 1200 | 406 | 545 | 1016 | 48B | AD 48B | D16CRXX | D10SRXX | AE 48B | E16CR25 | E10SR25 |
| 1400 | 457 | 697 | 1118 | 54B | AD 54B | D18CRXX | D10SRXX | AE 54B | E18CR25 | E10SR25 |
| 1500 | 559 | 849 | 1321 | 60B | AD 60B | D22CRXX | D10SRXX | AE 60B | E22CR25 | E10SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
| Belt Width (mm) |
Dimensions | Centre Roller (Ref No.) |
Side Roller (Ref No.) |
3 Roll Rubber Covered Transome Troughing Idlers |
3 Roll Rubber Covered Baseplate Troughing Idlers |
|||
| A (mm) | B (mm) | Transome Type / Sets (Ref No.) |
Transome (Ref No.) |
Baseplate Type / Sets (Ref No.) |
Baseplate (Ref No.) |
|||
| 400 | 152 | 178 | D6CRXXRC | D7SRXXRC | RT 16T | 16 LT | RT 16B | 16B |
| 450 | 203 | 178 | D8CRXXRC | D7SRXXRC | RT 18T | 18 LT | RT 18B | 18B |
| 500 | 203 | 203 | D8CRXXRC | D8SRXXRC | RT 20T | 20 LT | RT 20B | 20B |
| 600 | 305 | 203 | D12CRXXRC | D8SRXXRC | RT 24T | 24 LT | RT 24B | 24B |
| 650 | 356 | 203 | D14CRXXRC | D8SRXXRC | RT 26T | 26 LT | RT 26B | 26B |
| 750 | 356 | 254 | D14CRXXRC | D10SRXXRC | RT 30T | 30 LT | RT 30B | 30B |
| 800 | 406 | 254 | D16CRXXRC | D10SRXXRC | RT 32T | 32 LT | RT 32B | 32B |
| 900 | 508 | 254 | D20CRXXRC | D10SRXXRC | RT 36T | 36 LT | RT 36B | 36B |
| 1000 | 558 | 279 | D22CRXXRC | D11SRXXRC | RT 40T | 40 LT | RT 40B | 40B |
XX = Spindle diameter
1. 122Ø Rubber covered rollers can be supplied with 20 or 25Ø spindles
| Belt Width (mm) |
Dimensions A (mm) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
4 Roll Rubber Covered Transome Troughing Idlers |
4 Roll Rubber Covered Baseplate Troughing Idlers |
||
| Transome Type / Sets (Ref No.) |
Transome (Ref No.) |
Baseplate Type / Sets (Ref. No.) |
Baseplate (Ref No.) |
||||
| 1000 - 1050 | 305 | D12CRXXRC | D10SRXXRC | RT 42T | 42 LT | RT 42B | 42B |
| 1200 | 406 | D16CRXXRC | D10SRXXRC | RT 48T | 48 LT | RT 48B | 48B |
| 1400 | 457 | D18CRXXRC | D10SRXXRC | RT 54T | 54 LT | RT 54B | 54B |
| 1500 | 559 | D22CRXXRC | D10SRXXRC | RT 60T | 60 LT | RT 60B | 60B |
XX = Spindle diameter
1. 122Ø Rubber covered rollers can be supplied with 20 or 25Ø spindles
| Belt Width (mm) |
Dimensions | 127mm Diameter Troughing Idlers | |||||
| A (mm) | B (mm) | C (mm) | Transome Sets (Ref No.) | Centre Roller (Ref No.) | Side Roller (Ref No.) | Transome (Ref No.) | |
| 600 | 235 | 235 | 838 | HD 24Π| HD9.25CR25 | HD9.25SR25 | 24LTHDΠ|
| 650 | 311 | 235 | 889 | HD 26Π| HD12.25CR25 | HD9.25SR25 | 26LTHDΠ|
| 750 | 384 | 235 | 991 | HD 30Π| HD15.125CR25 | HD9.25SR25 | 30LTHDΠ|
| 800 | 460 | 235 | 1041 | HD 32Π| HD18.12CR25 | HD9.25SR25 | 32LTHDΠ|
| 900 | 533 | 235 | 1143 | HD 36Π| HD21.00CR25 | HD9.25SR25 | 36LTHDΠ|
| 1000 | 610 | 235 | 1240 | HD 40Π| HD24.00CR25 | HD9.25SR25 | 40LTHDΠ|
Π= Angle of side roller (fixed at manufacture)
|
Belt Width |
Dimensions | 127mm Diameter Troughing Idlers | |||||
| A (mm) | B (mm) | C (mm) | Transome Sets Ref No. | Centre Roller (Ref No.) | Side Roller (Ref No.) | Transome (Ref No.) | |
| 1000 | 311 | 311 | 1295 | HD 42Π| HD12.25CR-425 | HD12.25SR-425 | 42LTHDΠ|
| 1200 | 384 | 311 | 1448 | HD 48Π| HD15.12CR-425 | HD12.25SR-425 | 48LTHDΠ|
| 1400 | 384 | 384 | 1600 | HD 54Π| HD15.12CR-425 | HD15.12SR-425 | 54LTHDΠ|
| 1500 | 460 | 384 | 1753 | HD 60Π| HD18.12CR-425 | HD15.12SR-425 | 60LTHDΠ|
Π= Angle of side roller (fixed at manufacture)
| Belt Width (mm) |
Dimensions | Transome (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | B (mm) | C (mm) | Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
Transome Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
||
| 750 | 457 | 203 | 991 | 30LTP | AD 30TP | D18CRXX | D8SRXX | AE 30TP | E18CR25 | E8SR25 |
| 800 | 508 | 203 | 1041 | 32LTP | AD 32TP | D20CRXX | D8SRXX | AE 32TP | E20CR25 | E8SR25 |
| 900 | 610 | 203 | 1143 | 36LTP | AD 36TP | D24CRXX | D8SRXX | AE 36 TP | E24CR25 | E8SR25 |
| 1000 | 711 | 203 | 1240 | 40LTP | AD 40TP | D28CRXX | D8SRXX | AE 40TP | E28CR25 | E8SR25 |
| 1050 | 762 | 203 | 1295 | 42LTP | AD 42TP | D30CRXX | D8SRXX | AE 42TP | E30CR25 | E8SR25 |
| 1200 | 914 | 203 | 1448 | 48LTP | AD 48TP | D36CRXX | D8SRXX | AE 48TP | E36CR25 | E8SR25 |
| 1400 | 1067 | 203 | 1600 | 54LTP | AD 54TP | D42CRXX | D8SRXX | AE 54TP | E42CR25 | E8SR25 |
| 1500 | 1219 | 203 | 1753 | 60LTP | AD 60TP | D48CRXX | D8SRXX | AE 60TP | E48CR25 | E8SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
3. Transomes can also be supplied with 122mm dia. rubber covered rollers
| Belt Width (mm) |
Dimensions | Baseplate (Ref No.) |
102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | B (mm) | C (mm) | Baseplate Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
Baseplate Sets (Ref No.) |
Centre Roller (Ref No.) |
Side Roller (Ref No.) |
||
| 750 | 457 | 203 | 584 | 30 BP | AD 30BP | D18CRXX | D8SRXX | AE 30BP | E18CR25 | E8SR25 |
| 800 | 508 | 203 | 635 | 32 BP | AD 32BP | D20CRXX | D8SRXX | AE 32BP | E20CR25 | E8SR25 |
| 900 | 610 | 203 | 737 | 36 BP | AD 36BP | D24CRXX | D8SRXX | AE 36BP | E24CR25 | E8SR25 |
| 1000 | 711 | 203 | 838 | 40 BP | AD 40BP | D28CRXX | D8SRXX | AE 40BP | E28CR25 | E8SR25 |
| 1050 | 762 | 203 | 889 | 42 BP | AD 42BP | D30CRXX | D8SRXX | AE 42BP | E30CR25 | E8SR25 |
| 1200 | 914 | 203 | 1041 | 48 BP | AD 48BP | D36CRXX | D8SRXX | AE 48BP | E36CR25 | E8SR25 |
| 1400 | 1067 | 203 | 1194 | 54 BP | AD 54BP | D42CRXX | D8SRXX | AE 54BP | E42CR25 | E8SR25 |
| 1500 | 1219 | 203 | 1346 | 60 BP | AD 60BP | D48CRXX | D8SRXX | AE 60BP | E48CR25 | E8SR25 |
XX = Spindle diameter
1. 102Ø Rollers can be supplied with 20 or 25Ø spindles
2. 127Ø Rollers can only be supplied with 25Ø spindles
3. Transomes can also be supplied with 122mm dia. rubber covered rollers
| Belt Width (mm) |
Dimensions | 63.5mm Diameter Adjustable Angle Troughing Iders | |||
| A (mm) | B (mm) | Transome Sets (Ref No.) |
Rollers (Ref No.) |
2 Roll Bracket (Ref No.) |
|
| 250 | 132 | 311 | B 10B | B 10B | 2-ROLL-BRKT |
| 300 | 152 | 362 | B 12B | B 12B | 2-ROLL-BRKT |
| 350 | 178 | 413 | B 14B | B 14B | 2-ROLL-BRKT |
| 400 | 203 | 464 | B 16B | B 16B | 2-ROLL-BRKT |
|
Belt Width |
Dimensions | 102mm Diameter Troughing Idlers | 127mm Diameter Troughing Idlers | ||||||
| A (mm) | B (mm) | C (mm) | Transome Sets (Ref No.) |
Centre Rollers (Ref No.) |
Side Rollers (Ref No.) |
Transome Sets (Ref No.) |
Centre Rollers (Ref No.) |
Side Rollers (Ref No.) |
|
| 300 - 350 | 152 | 127 | 584 | AD 12S | D6SRXX | D5SR25SE | - | - | - |
| 400 | 152 | 178 | 635 | AD 16S | D6SRXX | D7SR25SE | AE 16S | E6CR25 | E7SR25SE |
| 450 | 203 | 178 | 686 | AD 18S | D8SRXX | D7SR25SE | AE 18S | E8CR25 | E7SR25SE |
| 500 | 203 | 203 | 737 | AD 20S | D8SRXX | D8SR25SE | AE 20S | E8CR25 | E8SR25SE |
| 600 | 305 | 203 | 838 | AD 24S | D12SRXX | D8SR25SE | AE 24S | E12CR25 | E8SR25SE |
| 650 | 356 | 203 | 889 | AD 26S | D14SRXX | D8SR25SE | AE 26S | E14CR25 | E8SR25SE |
| 750 | 356 | 254 | 991 | AD 30S | D14SRXX | D10SR25SE | AE 30S | E14CR25 | E10SR25SE |
| 800 | 406 | 254 | 1041 | AD 32S | D16SRXX | D10SR25SE | AE 32S | E16CR25 | E10SR25SE |
| 900 | 508 | 254 | 1143 | AD 36S | D20SRXX | D10SR25SE | AE 36S | E20CR25 | E10SR25SE |
| 1000 | 558 | 279 | 1240 | AD 40S | D22SRXX | D11SR25SE | AE 40S | E22CR25 | E11SR25SE |
XX = Spindle diameter
1. 102Ø Centre rollers can be supplied with 20 or 25Ø spindles
2. 102Ø Side and all 127Ø rollers can only be supplied with 25Ø spindles
3. 63.5 dia. Side guide roller ref = BSGR25M
4. Side guide roller brackets (pair) ref = SA-BRKT
| Belt Width (mm) |
Dimensions | 102mm Diameter Self Aligning Return Idlers | ||||
| A (mm) | B (mm) | C (mm) | Transome Sets Ref No. |
Return Roller (Ref No.) |
Transome (Ref No.) |
|
| 300 - 350 | 432 | 546 | 584 | DP 12S | DP12XX | 12SA-R |
| 400 | 483 | 597 | 635 | DP 16S | DP16XX | 16SA-R |
| 450 | 533 | 648 | 686 | DP 18S | DP18XX | 18SA-R |
| 500 | 584 | 699 | 737 | DP 20S | DP20XX | 20SA-R |
| 600 | 686 | 800 | 838 | DP 24S | DP24XX | 24SA-R |
| 650 | 737 | 851 | 889 | DP 26S | DP26XX | 26SA-R |
| 750 | 838 | 953 | 991 | DP 30S | DP30XX | 30SA-R |
| 800 | 889 | 1003 | 1041 | DP 32S | DP32XX | 32SA-R |
| 900 | 991 | 1105 | 1143 | DP 36S | DP36XX | 36SA-R |
| 1000 | 1092 | 1205 | 1240 | DP 40S | DP40XX | 40SA-R |
XX = Spindle diameter
1. 102Ø Return rollers can be supplied with 20 or 25Ø spindles
2. 63.5 dia. Side guide roller ref = BSGR25M
3. Side guide roller brackets (pair) ref = SA-BRKT
| Belt Width (mm) |
Dimensions A (mm) | 63mm Dia. (Ref No.) |
76mm Dia. (Ref No.) |
102mm Dia. (Ref No.) |
127mm Dia. (Ref No.) |
Rubber Covered Type 121mm Dia. (Ref No.) |
Imapct Type 127mm Dia. (Ref No.) |
| 250 | 330 | BP 10XX | - | - | - | - | - |
| 300 | 432 | BP 12XX | CP 12XX | DP 12XX | EP 12H25 | RP 12H25 | - |
| 350 | 432 | BP 12XX | CP 12XX | DP 12XX | EP 12H25 | RP 12H25 | - |
| 400 | 483 | BP 16XX | CP 16XX | DP 16XX | EP 16H25 | RP 16H25 | - |
| 450 | 533 | BP 18XX | CP 18XX | DP 18XX | EP 18H25 | RP 18H25 | - |
| 500 | 584 | BP 20XX | CP 20XX | DP 20XX | EP 20H25 | RP 20H25 | - |
| 600 | 686 | BP 24XX | CP 24XX | DP 24XX | EP 24H25 | RP 24H25 | HP 2425 |
| 650 | 737 | BP 26XX | CP 26XX | DP 26XX | EP 26H25 | RP 26H25 | HP 2625 |
| 750 | 838 | BP 30XX | CP 30XX | DP 30XX | EP 30H25 | RP 30H25 | HP 3025 |
| 800 | 889 | BP 32XX | CP 32XX | DP 32XX | EP 32H25 | RP 32H25 | HP 3225 |
| 900 | 991 | BP 36XX | CP 36XX | DP 36XX | EP 36H25 | RP 36H25 | HP 3625 |
| 1000 | 1092 | BP 40XX | CP 40XX | DP 40XX | EP 40H25 | RP 40H25 | HP 4025 |
| 1050 | 1143 | BP 42XX | CP 42XX | DP 42XX | EP 42H25 | RP 42H25 | HP 4225 |
| 1200 | 1295 | BP 48XX | CP 48XX | DP 48XX | EP 48H25 | RP 48H25 | HP 4825 |
| 1400 | 1448 | BP 5425 | CP 54XX | DP 54XX | EP 54H25 | RP 54H25 | HP 5425 |
| 1500 | 1600 | BP 6025 | CP 60XX | DP 60XX | EP 60H25 | RP 60H25 | HP 6025 |
XX = Spindle diameter
1. 63.5, 76 & 102Ø Rollers upto and including 1200 wide can be supplied with 20 or 25Ø spindles
| Belt Width (mm) |
Dimensions | 152mm Dia. Discs (Ref No.) | 191mm Dia. Discs (Ref. No.) | ||
| A (mm) | B (No. of Pitches) | C (mm) | |||
| 300 | 432 | 2 | 114 | 6RD BP12XX | 7RD CP12XX |
| 350 | 432 | 2 | 114 | 6RD BP12XX | 7RD CP12XX |
| 400 | 483 | 2 | 114 | 6RD BP16XX | 7RD CP16XX |
| 450 | 533 | 2 | 114 | 6RD BP18XX | 7RD CP18XX |
| 500 | 584 | 3 | 114 | 6RD BP20XX | 7RD CP20XX |
| 600 | 686 | 3 | 114 | 6RD BP24XX | 7RD CP24XX |
| 650 | 737 | 4 | 114 | 6RD BP26XX | 7RD CP26XX |
| 750 | 838 | 4 | 114 | 6RD BP30XX | 7RD CP30XX |
| 800 | 889 | 4 | 114 | 6RD BP32XX | 7RD CP32XX |
| 900 | 991 | 5 | 114 | 6RD BP36XX | 7RD CP36XX |
| 1000 | 1092 | 6 | 114 | 6RD BP40XX | 7RD CP40XX |
| 1050 | 1143 | 6 | 114 | 6RD BP42XX | 7RD CP42XX |
| 1200 | 1295 | 7 | 114 | 6RD BP48XX | 7RD CP48XX |
| 1400 | 1448 | 8 | 114 | 6RD BP54XX | 7RD CP54XX |
| 1500 | 1600 | 9 | 114 | 6RD BP60XX | 7RD CP60XX |
XX = Spindle diameter
1. Disc return rollers upto and including 1200 wide can be supplied with 20 or 25Ø spindles
Product Range